Additional printer setup

38

5Align the posts of the plastic bracket to the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place.

Note: Make sure that the plastic bracket has latched completely, and that the plastic bracket is seated firmly on the cage.

6Install the ISP on the plastic bracket.

Note: Hold the ISP at an angle over the plastic bracket so that any overhanging connectors will pass through the ISP opening in the cage.

Page 37 Page 39
Page 38
Image 38
Lexmark 237, MX710DHE, 24T7310, 037 manual
Page 37 Page 39
Top Page Image Contents