Function specifications | ||
Video input | Input signal | NTSC ( Composite video 75ohm |
function | Max Field rate | 60 fields per second |
| Number of cameras | Up to 4 cameras, |
|
| When active cameras are 3 channels, |
|
| 1ch |
Indication | Video viewing | 4 channels per screen or full screen viewing ( selected channels) |
function | Waveform/Bar meter | 4 Selectable waveform or bar meter (overlay) |
| Character display | Date and time : Current time, Record Y/M/D H:M:S |
|
| Operation display : Operation status |
|
| Channel number : |
Recording | Start operation | Push REC button for REC standby, push FWD button to start recording |
mode |
| Trigger function record |
|
| External signal (START/STOP) |
| Stop operation | Manual (Press STOP button) |
|
| Trigger mode |
|
| External control (Start/Stop signal) |
| Hard disk mode | OVERWRITE : Endless record by overwriting older video |
|
| ONE WAY : Record stops on hard disk full |
|
| Record resumes on replacing or initializing hard disk |
Playback | Playback operation | Normal playback, Reverse playback, Still image playback, |
|
| Skip playback, Block jump, Fast playback (x2, x4, x8), |
|
| Fast reverse playback (x2, x4, x8), Slow playback (1/2, 1/4, 1/8), |
|
| Slow reverse playback (1/2, 1/4, 1/8) |
| Search | Time search : Search by record date and time |
Units specifications
Video specifications
Video input | 4ch, BNC NTSC VBS 1.0 | |||||
Video output | 1ch, BNC NTSC VBS | |||||
Picture data | Quantization frequency/bit : 13.5MHz/8bit | |||||
handling | Video compression : Motion JPEG (Original) | |||||
Channels and |
| CHs |
| Pixels | Recording interval (fields/sec) |
|
Video interval | 1 | 1 |
| 720 x 240 | 60 |
|
| 2 | 2 |
| 720 x 240 | 30 |
|
| 3 | 3 |
| 720 x 240 | 30/15 |
|
| 4 | 4 |
| 720 x 240 | 15 |
|
| 5 | 4 |
| 360 x 120 | 60 |
|
Data specifications |
|
|
|
|
|
|
Input | 4ch | Sampling Frequencies 2kHz fix | ||||
Input ranges |
|
|
| |||
Output | 4ch |
|
|
|
|
|
Output ranges |
|
|
| |||
Quantization bit rate | 16bit (LSB 1 bit is used as identification sign) | |||||
Sampling method | Successive approximation type / Multiplexer type | |||||
Others |
|
|
|
|
|
|
Sync accuracy | ||||||
Sync signal | Start/Stop signal input : |
|
| |||
|
|
|
| Starts on Low, stops on Hi (polarity reversible) | ||
|
|
|
| Duration : 100mS or more. Repeat duration: 600mS or more | ||
| Sampling clock signal input : Sampling clock of measuring data (200 kHz or less) |
Visual Data Recorder
AQ-VU
http://www.teac.co.jp/
Synchronous 4 channels video and data recording
High-speed driving test
|
| Event search : Search from event start date time list | |
|
| ID search : Search from recording start point list | |
Event | Event list | Stores latest 1000 events (event start date and time) | |
|
| * For events with duplicated time, the first event is stored. | |
Menu | Main unit settings | Time correction, 30 seconds correction, Communication | |
| Record settings | Hard disk mode, Analog input ON/OFF, Hard disk initialization, etc | |
| Monitor settings | Character (date and time) / Bar graph selectable | |
External | Set the recording time prior to the recording start condition as | ||
level trigger |
| mentioned above. Setting zero seconds is equivalent to no | |
function |
| (with | |
| Level trigger | Set the level trigger threshold of designated channel. | |
|
| When the analog input signal exceeds the threshold level, | |
|
| the recording starts. | |
Record start | Analog level | Choice one of 1Channel to 4Channel. | |
condition |
| A trigger direction against the threshold level. UP(default) / DOWN | |
|
| Set the level trigger threshold [example : +50% ] | |
|
| The recording time prior to the recording start condition [0 to 999 sec] | |
| External trigger | When the START/STOP signal at the SYNC IN connector on the | |
|
| rear panel is changed from L level to H level, the recording stops. | |
| Manual operation | It is started with an operation button | |
Others | Internal clock | Correction : Manual entry in Monitor screen, or 30 seconds | |
|
| auto correction | |
| VIDEO OUT Connector | LAN Connector SYNC IN Connector | |
| CAMERA IN Connector |
| DC IN Connector |
|
|
| POWER Switch |
CAMERA POWER Connector |
| ANALOG IN/OUT Connector | |
| LCD Display |
| POWER LED |
|
|
|
| Alarm signal output : Indicates malfunctions of this unit |
| Event signal input : |
| Negative logic pulse or |
| Serial interface signal : TTL input / output |
Ethernet | TCP/IP |
Recording media | 2.5" removable HDD, using removable type package |
| Capacity : 40GB |
| Exchanging operation : |
| Exchange after stopping REC or PLAY, then shutting down the power. |
| Recording time : Approx. 5 hours / Approx. 10 hours (HDD:80GB) |
| Initialization : Quick (instant), Full (several hours with 40GB HDD) |
Internal clock accuracy | less than 60 seconds per month (ambient temperature 25 degC, at operation) |
Operating environment | |
Temperature | Temperature / Humidity (operating) : 0 to 35 degC / 10 to 80%RH |
*Always remove the HDD pack out of the main body at the time of the transportation by all means.
Safety/Electromagnetic Radiation
Comply with Electrical Appliance and Material Safety Law Conform to VCCI Class A
Current / Power consumption
Approx. 2A / 24W (excluding a supply power to the camera on 12V operation)
Power Supply
10 to 17V DC , 100 to 240V AC 50/60Hz (when using an adapter)
Dimension ( W x H x D )
Approx. 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts)
Weight
Approx. 2.3kg/5.07lb (Including 40GB HDD pack)
Standard accessories
Manual, Veiw Softwarer (
OPTION
LX-100 series sync. kit
Contents of Kit
Vehicle and rail safety test and driving test
Product line
Equipment maintenance such as elevators
The video and analog data is easy to verify using the
32 channels synchronized recording
By connecting with
as much as 32 channels of data can be
synchronously recorded.
205 |
|
|
|
|
MONITOR Key |
|
| MENU Key |
|
|
| FWD Key |
| |
|
|
|
| |
STOP Key |
|
| PAUSE Key | Key |
REC Key |
| REV Key | ENTER Key | |
60 |
|
|
|
|
5.5 | 17 | 200 | 17 | Unit : mm |
Cable
LX View Basic Software
LX View Sync. Option Software
Network Monitoring
Adapter cable for camera power supply (Approx. 10cm)
HDD Pack (40GB)
HDD Pack (80GB)
HDD Pack
Temporary monitor of plumbing and pump pressure such as in air conditioning repair
Factory/Plant equipment
It is used in a wide field
[Product line ] Extended recording at an unattended automatic product line
[Architecture ] Building skew and bridge shake
[Vehicle performance test ] Vibration data with synchronous video
on
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
Information Products Division
FAX :
URL : http://www.teac.co.jp/
Copyright TEAC CORPORATION 2008 | PRINTED IN JAPAN 1008 1 NH |
[Product line ] Monitor to find a product line problem and record vibration outbreak
[Support Service ] Temporary measurement and monitor of manufacturing
| support service |
[ Elevators ] | Monitor elevator malfunction |
[ Factory ] | Periodic maintenance of plant equipment |
| and temporarily monitor faulty point |
[ Machinery ] | Environmental tests of machinery |
| for deterioration, quake resistance, weather change |
[Product line ] Production line safety check
[University / Research organization ]