Teac AQ-VU Stand-alone unit not requiring PC, Built-in LCD display, Perfectly synchronized

4 channels synchronous video and analog data recording

Quickly verify the recorded video and analog data on-site with 6.4" LCD monitor

Controlling and monitoring from the desk

LAN

			4ch	4ch
High-resolution recording				Synchronous recording
				and play-back
		Video		Wave data
	Motion-JPEG			Analog
		Motion-JPEG		Analog Input ON/OFF
with 60 fields/sec max				Synchronous play-back
				of recorded video
				and analog data

AQ-VU is capable of synchronously recording up to 4 channels of video camera data and up to 4 channels of analog data. The recorded video and analog data are stored in the HDD pack and they can be synchronously played back. The video is recorded as fast as 60 frames per second per channel in Motion-JPEG for smooth high resolution. The number of recording channels in both video and analog can be freely selected based on application needs. The event outbreak time can be easily managed. The accessory viewer software allows play-back of the recorded video and analog data synchronously on PC.

It can record a video with various synchronized measurement data using LX-100 series.

Synchronous	4ch 3ch 2ch	1ch
video and data
recording
Video x4
Video	NTSC Camera
	(example)

Analog data x4

Vibration Weight

Pressure Temperature

Displacement Strain

Noise * etc.

*Sampling frequency is 2 kHz,

so the band-width is 1 kHz or less.

Monitoring in the field

Monitoring at the desk

Removable HDD Pack

(USB Interface)

Stand-alone unit (not requiring PC)

It can record video and analog data without PC connection.

Small footprint allows use in confined spaces.

Built-in LCD display

The recording and the recorded data can be easily monitored at the recording site.

example

Bar meter

Waveform

Video viewing :4 channels per screen or full screen viewing ( selected channels )

Waveform / Bar meter : 4 selectable waveform or bar meter ( overlay )

Perfectly synchronized

Perfectly synchronized between the video and data even after the extended recording. Accumulation delay time is zero *

( Video and analog signals are recorded as a set frame, preventing accumulation

delay time. ) * Sync accuracy +/- frame (in one video channel mode)

Analog trigger function

Level trigger allows recording before and after the event. The HDD space is used efficiently and results in quick and easy search operation.

ID 1 level trigger point

level trigger threshold

event 1 pre-trigger time trigger recording time

total recording time

OPTION

32ch synchronous recording

Using LX-100 series data recorder, it can synchronously record up to 32 channels of data. By synchronizing AQ-VU with LX-100 series data recorder, a variety of data measurements are possible.

LX-100 series

OPTION

Network Monitoring	ÁÑ­ÖÕ AQ-Net
Possible to control and monitor via Ethernet		TCP/IP
Using AQ-Net which is provided as an option, video		100bese/T
and analog signals can be monitored via Ethernet.
		Ethernet
AQ-VU can be fully controlled via network.
Also downloading data files is possible.
Recoding and downloading are independent, so
downloading data has no effect on recording.

* Downloading data file takes time longer than recording time. * Video update timing is adjusted automatically.

Synchronous recording and play-back

4 channels video and analog data

Small and lightweight (2.3kg/5.07lb)

Search and data edit on PC

Connecting the HDD pack to PC, the video and analog data can be synchronously played-back using AQView software. The search and data edit is simple and easy using AQView software.

Small, portable, compact package allows easy use of AQ-VU in the field (2.3kg/5.07lb). Low power consumption. It runs on either DC 10 to 17 volts or AC power sources. Power for camera is supplied, allowing for mobile environments such as vehicles, trains, etc.

Extended recording time (5 hours or continuous record)

5 hours recording time with 40GB HDD pack. (10 hours recording time with 80GB HDD pack) Endless recording mode allows use for extended time monitoring such as surveillance etc.

The data can be transferred to a file in TAFFmat format.

The video data can be transferred to a file in AVI format.

The video at mouse cursor position can be played-back

An event mark can be set during the recording and

play-back

Cables and optional viewer software screen	Example of Production Line
	This is example for monitoring SMT machine using four cameras and accelerometers.

Supported popular
		Spectrum analysis
software format
(Commercial product)
* The analysis software is other selling
Please contact each distributor in your country		Peak analysis
NI DIAdem 10 ( Video and waveform) FlexPro7 Professional ( waveform only)	DADISP/2002 ( waveform only)

* AQ-VU screen on the catalogue is simulated graphic.

HDD Pack

Developed by National Instruments Developed by Weisang GmbH Developed by DSP Development Corporation