Carrier Access CMG Router user manual Command Description

	Router Configuration
	Basic VoIP Setup
Command	Description
set 6:1:1 encapsulation ppp	Set Router trunk encapsulations to Point-to-Point
	Protocol.
set 6:1:1 up	Set Router trunk as In-Service
set 6:1 ip address {ip-addr}	Set Router IP Address and Subnet Mask
{mask}
set 6:1 up	Set Router as In-Service
add 6 "RemoteAdit" static ip	Set router WAN static ip network. Metric set as 1,
network {ip-addr} {mask}	normally indicates a direct network
{next-hop-ip-addr} 1
set 6 "RemoteAdit" trunk 1	Set router WAN trunk to port 1
set 6 "RemoteAdit" up	Set router WAN as In-Service
set 6 log last detail	Set the router log to add new entries and display the log
	in detail
set 6 voip sdpaddress 11.168.1.1	Set the address value to be used for the origin
	and connection lines in the SDP. (May be required
	depending on how the LAN and WAN are configured.)
reset	Reset the CMG card, to apply all configurations

CMG Router - Release 2.7 11-5