![](/images/new-backgrounds/1192289/192289189x1.webp)
Profile Directory:Local Profile
LAN (Local) Profile Setup
Setup < >
Additional setup screens for the Local (LAN) profile. The screen that is accessed depends on the chosen option. Listed below are the available field options:
<Static Networks >
Used to configure static network routes that can be reached locally. See Static Networks on page 4- 10, for more information.
<Static Addresses >
Configure static addresses for the local devices. See Static Addresses on page
<Filters >
Define data filters for this Adit unit. Filtering provides additional security by restricting which packets will be forwarded to/from the LAN. See Filters on page
<Advertise Networks/Server >
Enables the unit to advertise all networks and services to all remote units, or to advertise to no remotes. See Advertise Network/Server on page
<DHCP Server/BOOTP Relay >
Establish the Adit as a DHCP Server or BOOTP Relay Agent. See DHCP Server/Client/Relay on page
<LAN Collision Threshold >
Adjust the threshold at which excessive LAN collisions trigger an alarm. See LAN Collision Threshold on page
<Secondary IP Address >
Add a secondary IP address and subnet to the specified LAN interface. The router will then be capable of routing between subnets on the LAN interface or between the LAN subnets and any WAN subnet. A maximum of 8 secondary IP addresses can be added to the LAN interface. See Secondary IP Address on page
<Link Speed >
Sets the ethernet PHY mode and speed for the Router.
NOTE: It is highly recommended that this setting be left at
See Link Speed on page
CMG Router - Release 2.7 |