Carrier Access CMG Router user manual VoIP Setup Fields

Profile Directory:Router Card Profile

Voice Channels

VoIP Setup Fields

Start Channel - Set the starting channel of which to apply the following voice channel configuration to. Range is 1 to 48, default is 1. Start channel must be less than or equal to the end channel.

End Channel - Set the last channel of which to apply the following voice channel configuration to. Range is 1 to 48. Note: End channel must be equal to or greater than the start channel.

Channel Status - Puts the channel In-Service or Out-of-Service.

<Enabled> - Brings the channel back into service. This will cause an RSIP message to be sent to the call agent, with the "restart" value for the Restart Method parameter.

<Disabled> - Puts the channel Out-of-Service. Once channel is out-of-service, the call agent cannot access the endpoint IP associated with the voice channel.

Event Log - Sets the parameters of the log.

<None> - Event log is set to not log errors.

<Errors> - Event log is set to record protocol and other errors only. <MGCP> - Event log is set to record MGCP protocol events.

<Both> - Event log is set to record MGCP protocol events and errors.

Endpoint Prefix - Defines the common part of the MGCP endpoint name for a voice channel. The default prefix is "aaln". The Endpoint Prefix is a text string with 1 to 16 characters.

Endpoint Suffix - Defines the variable part of the MGCP endpoint name for a voice channel. The default suffix is the voice channel number. The Endpoint Suffix is a text string with 1 to 16 characters.

Receive Gain (dB) - Defines the gain on the receive side (packet-to-TDM) voice path for the specified voice channel. The default gain is 0 dB.

Transmit Gain (dB) - Defines the gain on the transmit side (TDM-to-packet) voice path for the specified voice channel. The default gain is 0 dB.

Silence Suppression - Enables or disables silence suppression as the default for voice calls for one or more voice channels.

<Disabled> - Do not use silence suppression unless overridden by the call agent. <Enabled> - Use silence suppression if possible, with no override by the call agent.

CMG Router - Release 2.7 3-43