Carrier Access CMG Router user manual Mgcp Interoperability Menu Fields

Profile Directory:Router Card Profile

MGCP

MGCP Interoperability Menu Fields

Version

<IETF 0.1> IETF MGCP version 0.1, as specified in an IETF MGCP Internet draft. <IETF 1.0> IETF MGCP version 1.0, as specified in an IETF RFC 2795 (default). <NCS> Packet Cable MGCP version NCS 1.0

Delay Alert

<Disabled> Allow ringing the terminating subscriber before remote SDP is received (default). <Enabled> Delay ringing the terminating subscriber until remote SDP is received.

Hookswitch Reporting

<Always> Always report hookswitch events (default).

<On Request> Wait for a request from the call agent before reporting hookswitch events.

Default IETF Event Package

<DTMF> Will set the DTMF package the default. <General> Will set the General package the default. <Line> Will set the Line package the default.

PiggyBacking

<Disabled> Disallow sending of piggyback commands (default). <Enabled> Allow sending of piggybacked commands.

Address Format

<Brackets> MGCP will place brackets around IP addresses (default). <No Brackets> MGCP will not place brackets around IP addresses.

Dialstring Format

<Commas> Insert commas between digit events (default) <No Commas> Do not insert commas between digit events.

SDP Mode

<Full> SDP section contain all mandatory lines (v, o, s, c, t, m)

<Minimal> SDP section contain only necessary lines (v, c, m) plus a. Which are the only lines really used for setting VoIP media stream parameters.

Parse Mode

<Lenient> Do not return an error response in benign situations (default).

<Strict> Return an error response for all protocol errors or requests for unavailable functions. <Verbose > Do not return an error response in benign situations, but log the event.

3-34 CMG Router - Release 2.7