Profile Directory:Local Profile
Filters
Defining Protocol Filters
Protocol
Filter
Window
Use this screen to define filters that are based on specific protocols being used by LAN devices. These filters, when enabled, provide security by restricting LAN/WAN access based on a specific protocol.
Protocol Name - Filter name can be up to 7 characters.
Ethernet Value - Enter the assigned Ethernet value for this protocol, see Addendum B, Ethernet Protocol Types.
IEEE Value - Enter assigned IEEE value for this protocol. The IEEE value is the same as the DSAP and SSAP values in a SNAP packet.
NOTE: Only identify either an Ethernet or IEEE value, but not both.
To enable a filter return to the Enabled Filter Window ([ESC] from this window) and select [CTRL A], select filter type (Custom, Protocol or Address) filter will be added to the Enabled Filters window.
NOTE: Each filter, even if it is not enabled, will count toward the maximum number of 500 filters.
CMG Router - Release 2.7 |
