Router Configuration
Frame Relay Internet Connection and Public IP Address Routing
Frame Relay Internet Connection and Public IP Address Routing
Router in Slot 1
ISP Router that provides the Internet connection.
Command |
| Description |
set clock1 a:1 | Set primary master transmit clock source | |
set 1 default | Set Router to default settings | |
disconnect a:1 | Disconnect all connections to the T1 on the | |
|
| Controller (slot a) |
|
| |
disconnect 1 | Disconnect all connections to the router in slot 1 | |
set a:1:all type data | Set the | |
connect a:1:all 1:1:1 | Connect all of | |
rename 1 "LocalUnit" "Boulder" | Rename the Axxius 800 from "LocalUnit" | |
|
| (default) to "Boulder" (LAN) |
|
| |
rename 1 "RemoteUnit" "wan1" | Rename WAN #1 from "RemoteUnit" (default) to | |
|
| "wan1" |
|
| |
set 1:1 ip address 215.168.21.14 | Set the ethernet IP address, in the conventional IP | |
255.255.255.0 | address format. (Router LAN) | |
add 1 "wan1" static ip network | Adds a static IP network (route) to the WAN | |
0.0.0.0 | 0.0.0.0 1 | interface |
set 1:1:1 encapsulation fr | Set the encapsulation on trunk 1 to Frame Relay | |
set 1 lmi annexd | Disable LMI to Annex D | |
set 1 "wan1" trunk 1 | Set the WAN interface named "wan1" to be | |
|
| mapped to trunk 1 |
|
| |
set 1 "wan1" dlci 101 | Set the DLCI number | |
reset 1 |
| Reboot the router, to enable all configurations set |
CMG Router - Release 2.7 |
|
