Carrier Access CMG Router user manual Rsip, Spanning Tree Protocol

	Glossary
RSIP	Realm-Specific Internet Protocol. RSIP is an IP address translation
	technique that is an alternative to NAT. RSIP lets an enterprise safeguard
	many private Internet addresses behind a single public Internet address.
RTCP	Real-Time Conferencing Protocol. Supports real-time conferencing for
	large groups on the internet. It has source identification and support for
	audio and video bridges/gateways. Supports multicast-to-unicast
	translators.
RTP	Realtime Transport Protocol. An IETF standard for streaming realtime
	multimedia over IP in packets. Supports transport of real-time data like
	interactive voice and video over packet switched networks.
SDP	Session Description Protocol. SDP is intended for the description of
	multimedia sessions over IP-based networks. Defined in RFC2327.
SNAP	Subnet Access Protocol. A version of the IEEE local area network logical
	link control frame similar to the more traditional data link level
	transmission frame that lets you use nonstandard higher-level protocols.

SNMP

Spanning Tree Protocol

Simple Network Management Protocol. SNMP is the most common method by which network managements applications can query a management agent using a supported MIB (Management Information Base). SNMP operates at the OSI application layer.

Spanning Tree Protocol is a link management protocol that provides path redundancy while preventing undesirable loops in the network. For an Ethernet network to function properly, only one active path can exist between two stations.

T1	Trunk Level 1. A digital transmission link with a total signaling speed of
	1.544 Mbps. T1 is a standard for the digital transmission in North
	America.
TACACS+	Terminal Access Controller Access Control System.

CMG Router - Release 2.7 Glossary - 7