![](/images/new-backgrounds/1192289/192289493x1.webp)
|
| Router Configuration |
|
| |
|
|
|
Denver Router in Slot 3 |
| |
|
|
|
| Command | Description |
|
|
|
| set 3 default | Set Router to default settings |
| disconnect a:1 | Disconnect all connections to the T1 on the |
|
| Controller (slot a) |
|
|
|
| disconnect 3 | Disconnect all connections to the router in slot 1 |
| set clock1 a:1 | Set primary master transmit clock source |
| set a:1:all type data | Set the |
| connect a:1:all 3:1:1 | Connect all of |
| rename 3 "LocalAdit" "Denver" | Rename the Adit 600 from "LocalAdit" (default) |
|
| to "Denver" (LAN) |
|
|
|
| rename 3 "RemoteAdit" "wan1" | Rename WAN #1 from "RemoteAdit" (default) to |
|
| "wan1" |
|
|
|
| set 3:1 ip address 2.2.2.1 | Set the ethernet IP address, in the conventional IP |
255.255.255.0 | address format. (Router LAN) | |
| add 3 "wan1" static ip network | Adds a static IP network (route) to the WAN |
1.1.1.0 255.255.255.0 1 | interface | |
| set 3:1:1 encapsulation fr | Set the encapsulation on trunk 1 to Frame Relay |
| set 3 lmi disable | Disable LMI (Local Management Interface) |
| set 3 "wan1" trunk 1 | Set the WAN interface named "wan1" to be |
|
| mapped to trunk 1 |
|
|
|
| set 3 "wan1" dlci 101 | Set the DLCI number |
| reset 3 | Reboot the router, to enable all configurations set |
CMG Router - Release 2.7 |
|