Statistics Window
VoIP Channel View
#
The number column identifies the voice channel number within the CMG. There are 48 possible CMG voice channels, and, on the status screen these are organized into 3 columns of 16 channels each. Each CMG voice channel to be used for VoIP operations must be connected to an FXS channel on one of the FXS or T1/E1 cards within the same Adit 600 chassis. See CONN field below.
STATUS
The STATUS column indicates the combined configuration, restart, and call status for each CMG voice channel.
STATUS | Meaning |
Down | Channel is configured as Down or the channel is not connected to an FXS |
| port on the Adit 600. |
|
|
NotUsed | No SIP user ID has been provisioned for the channel. |
|
|
Restart | Channel is configured as Up, MGCP is up, and the channel has issued an |
| MGCP restart (RSIP) command to the external call agent. The channel will |
| stay in this state until the call agent responds with a positive |
| acknowledgement. |
|
|
Idle | The channel has received a positive response to the last restart command and |
| there is no call active. |
|
|
Setup | An outgoing call |
|
|
Active | An incoming call |
| incoming/outgoing call is active (answered). |
|
|
SIG
The SIG column indicates the signaling type configured for each CMG voice channel.
Type | Meaning |
FXSL | FXS - Loop Start. |
|
|
FXSG | FXS - Ground Start. |
|
|
CONN
The CONN column indicates which external FXS interface is attached to this numbered CMG voice channel. If there is no FXS channel attached to a CMG voice channel, no VoIP calls can be made to/from that CMG channel. In this case the status of the CMG channel will be shown in the channel status screen as Down, even if the CMG voice channel is configured as Up.
CMG Router - Release 2.7 |
