Carrier Access CMG Router user manual When Telneting into the Router the following will appear

Management Window

System Time/Login

When Telneting into the Router the following will appear:

>telnet 1 Connected.

Escape character is '^]'.

1.Type the Enhanced Security Password here. Note: there will be no effect to the screen here until the correct password is typed in. When the correct password is typed, no return or other keystroke is needed, the following will appear:

Password >

NOTE: If Enhanced Security is enabled, and the Administrator does not note the password there is no way to access the Router until you have reset the router back to it’s default settings, losing all configuration settings. See set [router_card-addr} default.

2.At this point the Router is requesting your Level 1, 2 or 3 User Password. Enter your password and select [ENTER] and continue as you would Telnet into the Router as normal.

Password >******

Select a terminal type...

(<space> or <back-space> to toggle, <CR> to accept) Terminal: <generic>

CMG Router - Release 2.7 2-7