Carrier Access CMG Router LAN Packet Totals, WAN Packet Totals, Received, Transmitted, Errors

Statistics Window

Run-Time

LAN Packet Totals

Use this field to review the number of LAN packets that the local unit has Received, Transmitted, and contained Errors. If Auto-Updateis set to <No>, the LAN packet totals will not increment while the screen is displayed.

Received

This field will increment as packets are received from the LAN. For this total to update, Auto-Updatemust be <On>.

Transmitted

This field will increment as packets are transmitted by the Adit to the LAN. These include packets received from the WAN as well as internally generated packets. For this total to update, Auto-Updatemust be <On>.

Errors

This field increments as packets are transmitted to, or received from the LAN in error. This includes RX CRC errors (partial frames, aborted frames and “bad frames”) and TX retry failures and RX carrier loss errors. This does not include bad packets that result from collisions. For this total to update, Auto-Updatemust be <On>.

NOTE: There are WAN protocol packets sent to the telephone company switch, even when there are no active calls.

WAN Packet Totals

Use this field to review the number of WAN packets that the local unit has Received, Transmitted, and contained Errors. If Auto-Updateis set to <No>, the WAN packet totals will not increment while the screen is displayed.

Received

This field increments as packets are received from the all remote sites. For this total to update, Auto-Update

WAN. This includes packets from must be <On>.

Transmitted

This field increments as packets are received from the LAN and internally generated packets, such as network optimization packets, which have been transmitted to the WAN. For this total to update, Auto-Updatemust be <On>.

8-4 CMG Router - Release 2.7