Router Configuration
Fax and Modem Setup
8. Select a channel or range of channels to configure.
9.Set the Fax setting, from one of the four Fax options:
<none> - a fax call would be treated as a normal voice call. Default. <bypass> - will cause the line to transmit in G.711 mode, with silence suppression disabled, on detection of Fax tones.
<T38> - will use T.38 relay if no more than 5 channels are already using T.38 at the same time. Note: there is a limit of six simultaneous T.38 sessions. <T38reserved> - this line will always be able to use T.38 relay.
Card | Maximum # of Channels configured for T.38 Reserved |
CMG | 6 Channels |
12 Channels |
10.Set the Modem setting, from one of the two Modem options:
<none> - a modem call would be treated as a normal voice call. Default. <bypass> - upon detection of a modem tone, the line will switch to G.711 mode, with echo cancellation and silence suppression disabled.
CMG Router - Release 2.7 |
