5. ATTACHING AN ARM STAND

The L461 can be used with an arm stand by removing the tilt stand and attaching the arm stand to the terminal.

´Use an arm stand that satisfies the followings.

• When using the L461 with an arm stand, the arm stand must be VESA approved :

*Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad.

*Use an arm stand that is able to support an object weighting 8.0 kg.

´TÜ V/GS approved arm stand.

´Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.

´Use an arm stand remaining that position where it is manually moved.

´Use an arm stand with the ability to tilt the monitor forward and backward.

´Please connect cables after attaching an arm stand.

M4 x 16 mm

75 mm

75 mm

ENGLISH

Setup Procedure

1. Lay the L461 down as shown below. Do not scratch the panel.

Soft Cloth or

Cushion

2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10 mm).

5. ATTACHING AN ARM STAND 27

Page 27
Image 27
Eizo L461 manual Attaching AN ARM Stand, Setup Procedure