24 4. ADJUSTMENT
4-3. Color Adjustment
The “ColorManagement”menu in the ScreenManager enables to change the color of the
screen.

Before the Color adjustment

•Allow the LCD monitor to stabilize for at least 20 minutes before making color
adjustments.
•After finishing each adjustment in the custom mode, select “Save” icon to resister the
adjustment. Otherwise, the adjustment will be lost.
•The adjustment values represent the current level within the specific adjustment only.
They are available only as a reference tool. (To create a uniform white or black
screen, the percentages for each will probably not be the same.)
•In the analog input, perform the “Range Adjustment” (p.21) before making the color
adjustments . The gradation pattern like below is recommended for the “Range
Adjustment”.
1. To change the color tone of the white.
ÆÆ
ÆÆ

ÆSet the “Temperature”.p.35)

The “Temperature” can be set from 4,000 K to 10,000 K , in 500 K increments
(including 9,300 K). The default setting is “OFF”.
To resister the adjustment in the custom mode, select the “Save” icon and then push
the enter button.
•Setting the temperature under 4,000 K or over 10,000 K invalidates the color
temperature setting. (The color temperature’s setting turns “OFF”.)
•Adjusting the “Gain” (p. 25) invalidates the color temperature setting. (The
color temperature’s setting turns “OFF”.)