2-2. Connecting the signal cable

• Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the DVI-I connector at the rear of the monitor and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

[Analog Input]

Video Output Connector

D-Sub mini 15 pin

·Standard graphics board ·Macintosh G3 (Blue & White) / G4

FD-C16 (enclosed)

Video Output Connector

D-Sub 15 pin

Macintosh

Macintosh Adapter (Optional)

[Digital Input]

Video Output Connector

DVI

Digital graphics board

FD-C04 (Optional)

The L461 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple Display Connector).

12 2. CABLE CONNECTION

Page 12
Image 12
Eizo L461 manual Connecting the signal cable, Analog Input, Digital Input