Lincoln Electric Explore Comprehensive Accessories for Lincoln Wire-Matic 255 and Spool Gun Adapter

C-1 ACCESSORIES C-1

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

OPTIONS/ACCESSORIES

OTHER AVAILABLE MAGNUM 250L GUN AND CABLE ASSEMBLY

The following GMAW gun and cable assemblies are available for use with the WIRE-MATIC 255. Each is rated 200 amps 60% duty cycle or 250 amps 35% duty cycle. The gun and cable assemblies are equipped with the integrated connector, twist-lock trigger con- nector, and includes a liner, diffuser, and contact tips for the wire sizes specified:

LENGTH	PART NO.	WIRE SIZE
10' (3.0 m)	K533-1
12' (3.6 m)	K533-2*	.035-.045”
15’ (4.5 m)	K533-3	(0.9-1.2mm)
10' (3.0 m)	K533-4
12' (3.6 m)	K533-5	.025-.030”
15’ (4.5 m)	K533-6	(0.6-0.8mm)

* Included with the K578-1.

MAGNUM GUN CONNECTION KIT (Optional K466-6)

Using the optional K466-6 Magnum Connection kit for the Wire-Matic permits use of standard Magnum 200, 300 or 400 gun and cable assemblies.

K672-1 SPOOL GUN ADAPTER KIT

WARNING

The kit includes a spool gun adapter module assembly with a single connecting plug, a rear gas inlet setting with hose, a gun and cable holders and mounting hardware with installation and operating instructions. (L9696)

CAUTION

The spool gun module is intended for use with Lincoln Electric® Magnum™ Spool Guns only. Use with other units may cause damage to the equip- ment. For Spool Gun operation, refer to the instruction manual provided with the Magnum™ Spool Gun.

____________________________________

MAKING A WELD WITH THE SPOOL GUN ADAPTER AND SPOOL GUN (K672-1) INSTALLED

The toggle switch on the front of the spool gun adapter box permits quick transfer between the use of the Wire-Matic 255 with its feeder gun and the connected spool gun for same polarity electrodes.

Return to Section TOC

Return to Master TOC

Remove all input power to the Wire-Matic 255 before proceeding.

____________________________________

The K672-1 Spool Gun Adapter Kit provides recessed panel “up front" direct connection of the K487 Spool Gun (with remote speed control), or the K469 Spool Gun (requiring K518 Connection Adapter) with the SP- 255, SP255-I and Wire-Matic 255 wire feed welder machines.

It also provides single switch transfer between the machine's use with its feeder gun or the spool gun for same polarity welding with different wire and gas processes.

WIRE-MATIC 255