Off Timer
The off timer function causes the monitor to automatically enter a power off mode after a predetermined amount of time has lapsed. This function was created to reduce afterimage p.35) characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
[Procedure]
(1)Select “Off Timer” in the ScreenManager “Others” menu.
(2)Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to 23 hours).
[Off timer system]
PC | Monitor | LED |
|
|
|
On Period (1H~23H) | Operation | Green |
|
|
|
Last 15 min. in "On period" | Advance Notice *1 | Green Flashing |
|
|
|
"On period" expired | "Power Off" Mode | Flashing yellow slowly |
|
|
|
*1Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press the power switch during the advance notice period. The monitor will continue to operate for an additional 90 minutes.
Press the power switch to return to a normal screen.
•The off timer function works while the PowerManager is active, but there is no advance notice before the monitor’s power is switched off.
ENGLISH
3. ScreenManager 17
