Eizo L461 9. GLOSSARY

9. GLOSSARY 35

ENGLISH

9. GLOSSARY

The Afterimage is particular to LCD monitors when the monitor screen is left on for

a long period without use. The “Afterimage” can be removed gradually by

changing the displayed image.

With the analog input signal display, the analog signal is converted to a digital

signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs

to produce the same number clock pulse as the dot clock of the graphics system.

When the clock pulse is not correctly set, some vertical bars of distortion are

displayed on the screen.

Color Temperature is a method to measure the white color tone, generally indicated

in degrees Kelvin. At high temperatures the white tone appears somewhat blue,

while at lower temperatures it appears somewhat red. Computer monitors

generally give best perfoemance at high temerature settings.

5000K: Slightly reddish white.

6500K: Warm-white tone, similar to white papaer or daylight.

9,300K: Slightly bluish white.

(Digital Visual Interface)

A digital flat panel interface. DVI can transmit digital data from the PC directly

without loss with the signal transition method “TMDS”. There are two kinds of

DVI connectors. One is DVI-D connector for digital signal input only. The other is

DVI-I connector for both digital and analog signal inputs.

(DVI Digital Monitor Power Management)

The Power management system for the digital interface. The “Monitor ON” status

(operation mode) and the “Active Off” status (power-saving mode) are indispensable

for the DVI-DMPM as the monitor’s power mode.

Adjusts each color parameter for red, green and blue. The color of the LCD

monitor is displayed through the color filter of the LCD panel. Red, green and blue

are the three primary colors. The colors on the monitor are displayed by

combining these three colors. The color tone can change by adjusting the

illumination amount passed through each color’s filter.