Logitech 900 manual Setup, Changing cables, Xxs Xs S M L, Comply, Foam Tips

UE 900

Setup

1

XXS XS S M L

Comply™	S	M	L
Foam Tips

3

UE 900

Changing cables

4

Choose ear cushion size for comfortable fit and good sound. Go to www.logitech.com/support/ ue900 for more information about choosing ear cushions.

2

Attach ear cushions to earphones. Push cushion past rib for secure fit.

Connect earphones to a device with 3.5 mm headphone jack.

For air travel, use Airline adapter to reduce volume spikes caused by in-flight announcements.

For devices with a ¼-inch (6.35 mm) input jack, use the ¼-inch (6.35 mm) adapter.

Wear the earphones

1.Wrap cable around ear.

2.Insert right earphone (marked “R”) in right ear and left earphone (marked “L”) in left ear.

3.When using the vi cable with microphone, gently pull cable tight to remove slack.

4.When using the audio-only cable, slide cinch up the back of the head until secure.

Note: Do not remove earphone from ear by pulling on cable.

1.Hold earphone. Hold cable where it attaches to earphone.

2.Gently pull cable from earphone.

3.Attach new cable. Cable snaps into place.

Note: Make sure to connect the “R” (right) cable to the “R” earphone and the “L” (left) cable to the “L” earphone.

4  English English  5