BSRQuickInstallGuide_Trifold3.pdPage 1 8/2/2006 10:01:54 AM
BusinessBSR222Secure Router 222 Quick Install Guide
You can download all the documents | Steps 1 4 |
referred to in this Quick Install guide at | Before you |
www.nortel.com. | start |
|
Step 9
Assign TCP/IP
addresses
9 | 9. Set up the IP addresses on each computer connected to the |
BSR222: |
a. Set each computer to dynamically obtain an IP address, or assign a static IP address. If you assign a static IP address, choose one between 192.168.1.2 and 192.168.1.254.
Note: Assign a static IP address for PPTP encapsulation.
| 15 | 15. From the first Wizard window, choose the type of |
| encapsulation and service that your ISP supplies. The | |
| wizard displays different windows for each type of | |
|
| encapsulation and service. |
16 | 16. Depending on the type of encapsulation that your ISP | |
uses, enter the following information: | ||
Ethernet
Choose the Service Type: Standard,
PPP over Ethernet
2
1
1. Contact your Internet Service |
Provider (ISP) to get the following |
information: |
a. Encapsulation type: Ethernet, PPP |
over Ethernet, PPTP |
b. Assign a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1.
c. If you assign a static IP address in step 9a, assign the DNS server IP addresses. If you do not know the DNS server IP
Enter the Service Name, User Name and Password assigned by your ISP, and enter 100 seconds as the Idle Timeout. Choose
PPTP
Enter the User Name and Password assigned by your ISP. Choose
2. Get your Domain Name from the |
User Accounts dialog box in the Control |
b. ISP IP addresses: WAN, DNS |
servers, Gateway, and WAN MAC |
addresses, choose Obtain a DNS server address automatically.
Connection to maintain constant service. Also, enter the My IP address, My IP subnet mask, PPTP server IP address, and Connection ID (of the form
Panel. For details, see your operating |
system Help files. |
address |
Steps 10 
12
Access the BSR222
10
10. In the address |
field of your browser, |
enter 192.168.1.1 |
n:name).
Step 17
Enter ISP IP
3 | 3. Get your Computer Name from the System |
Properties dialog box on your computer. |
C |
| 4 | 4. Get the IP addresses |
M |
| of DNS and remote | |
Y | Steps 5 | 8 | servers on your LAN. |
| (optional) | ||
| Install the hardware | ||
CM |
| ||
MY |
| 5 |
|
CY |
|
| |
CMY |
|
|
|
K |
| 5. Place the BSR222 on | |
|
| a flat surface with | |
sufficient clearance for the front and rear connection points, or use the supplied holder
to vertically mount it. | 6 |
|
11
11. Enter the default user name (nnadmin) and password (PlsChgMe!) to log onto the BSR222.
12 | 12. You can replace the default password or |
use it as it is. |
Steps 13 
16
Start the wizard
addresses (if required)
17
17.If your ISP provides a fixed IP address for their WAN:
a. Choose Use fixed IP address.
b. Enter the My WAN IP,
My WAN IP subnet mask, Gateway (Remote IP), and
System DNS Servers addresses, if required. Otherwise, accept the default value of Get automatically from ISP.
6. Connect your PC and up to three other computers or network devices to 
the four Ethernet ports.
7 | 7. Connect your Internet service to the |
WAN port next to the Power LED. |
13
13.On the left navigation pane, click Wizard.
Steps 18 
19
Test your Internet 
connection
19
18
18.The BSR222 setup is complete. Close your browser.
8 | 8. Connect the supplied power adapter to the rear of the |
BSR222 and to a grounded AC power source. |
N0118060
14
14.In the General Setup window, enter the system name (your computer name) and the domain name.
19.Test your connection to the Internet by opening your browser and visiting a known Web site.
For more detailed installation instructions, refer to Nortel Business Secure Router 222 Fundamentals.
