Troubleshooting
ENGLISH
•If the mill does not run when switched on:
•If the mill runs when switched on, but coffee does not grind:
The cutting burrs require cleaning or are worn. See “Cleaning the Cutting Burrs” on page 13 or “Replacing the Cutting Burrs” on page 15 for more information.
•If the mill is operating normally, but stops abruptly:
Immediately turn off the mill. A foreign object, such as a pebble or twig, may have jammed the cutting burrs. See “Cleaning the Cutting Burrs” on page 13 for more information.
Check to see if the mill is plugged into a grounded 3 prong outlet. If it is, unplug the mill, then plug it into the same outlet again. If the mill still does not work, check the fuse or circuit breaker on the electrical circuit the mill is connected to and make sure the circuit is closed. If the mill does not run after taking these steps, a foreign object may be jamming the cutting burrs. See “Cleaning the Cutting Burrs” on page 13 for more information.
•If the grind is too coarse, or the mill isn’t producing an acceptable range of grinds:
See “Adjusting the Cutting Burrs” on page 9 or “Replacing the Cutting Burrs” on page 15 for more information.
If the problem cannot be fixed with the steps above, see the KitchenAid Warranty and Service sections on pages
*Do not return the Burr Coffee Mill to the retailer. They do not provide service.
16
