KitchenAid PRO LINE ADjusting the cutting burrs, Adjusting for Maximum Grind Fineness, English

ADjusting the cutting burrs

From the factory, the KitchenAid® PRO LINE™ Burr Coffee Mill will provide grinds suitable for almost all types of brewing. If you’re an espresso or French Press aficionado, however, you may wish to adjust the cutting burrs to provide optimum performance for your style of brewing. With adjustment, the Burr Coffee Mill will easily meet stringent Specialty Coffee Association of America grind-size specifications for espresso (250 micron grind size) or French Press brewing (1500 micron grind size).

ENGLISH

Adjusting for Maximum

Grind Fineness

Adjusting the mill to provide maximum fineness will slightly decrease the grind sizes throughout the grinding range. (To adjust the mill to provide coarser grinds, see page 10.)

1.Empty the bean hopper, then run the mill a few seconds to clear any remaining beans from the machine.

2.Turn the grind control dial to level “8”.

3.Using a 5⁄32-inch (4 mm) allen wrench or hex-head screwdriver, remove the screw located in the front of the grind control dial by turning it counter- clockwise. Hold the grind control dial so that it does not rotate as the screw is removed. Once the screw is free, remove the grind control dial.

The white grind control gear should

be visible once the grind control dial is removed.

4.Turn on the mill by flipping the On/Off Switch to the “On” position.

Continued…