KitchenAid KPCG100 Faceplate Assembly & Screws, Precision Stainless Steel Cutting Burrs, English

ENGLISH

burr coffee MIll features

Faceplate Assembly & Screws

Assembly includes the grind control dial and grind level ring. Two faceplate screws attach the faceplate assembly to the motor housing. Loosen the screws and remove the faceplate assembly to access the burrs. When reassembling the faceplate, the two screws must be tightened simultaneously to allow the faceplate to sit flush with the Burr Coffee Mill.

Precision Stainless Steel Cutting Burrs

Large 21⁄4-inch (5.7 cm) diameter flat cutting burrs provide long life and superb grind consistency. Burrs can be adjusted to compensate for wear, or calibrated to meet stringent Specialty Coffee Association of America guidelines for espresso and French Press grinds.

Low-RPM Operation

A special DC motor and gear reduction system slows the rotation of the cutting burrs, minimizing the frictional heating of the grinds and preserving coffee flavor and aroma. The low rpm operation also reduces the static charge – and “cling” – of coffee grinds.

Power Cord with Tie

Round cord has no grind-trapping seams; the tie can be used to bundle any excess.

One-Piece Metal Base with No-Slip Rubber Feet

Metal base provides a stable platform for the mill. Rubber feet dampen noise and vibration, and help protect the countertop.

Burr Cleaning Brush

Dense bristles sweep grinds from the cutting burrs quickly and easily.