Care and cleaning
Cleaning the Motor Housing and Hoppers
•Make sure the Burr Coffee Mill is switched off and unplugged before cleaning.
•Do not immerse the motor housing in water.
•To avoid damage to the Burr Coffee Mill, do not immerse the cutting burrs,
•To avoid damaging the finish, do not use abrasive cleansers or scouring pads.
•Wipe the motor housing and cord with a clean damp cloth. Dry with a soft cloth.
•Wash the coffee bin, bean hopper, and hopper lid in hot soapy water, then rinse and dry.
•The bean hopper, hopper lid, and coffee bin can also be washed in the top rack of a dishwasher.
Cleaning the Cutting Burrs
If the mill is used frequently, the cutting burrs need to be cleaned every few weeks for best performance. Cleaning enables the burrs to achieve the finest, most consistent grinds possible – which is especially important when grinding coffee for espresso.
Foreign objects – like pebbles or twigs – sometimes find their way into whole bean coffee. These objects may cause the mill to jam. If this happens, follow the
1.Make sure the mill is switched off and unplugged. Remove the coffee bin and bean hopper from the mill.
2. Using a |
| |
| ||
two faceplate screws |
| |
until the faceplate assembly is free. | ENGLISH | |
(The faceplate screws have retaining | ||
| ||
clips that prevent them from being |
| |
removed from the faceplate assembly.) |
| |
|
|
3.Slowly slide the faceplate assembly away from the motor housing. A separate
Faceplate Assembly
Continued…
13
