8

LM

N

Connecting the hose (fig. A)
• Insert the hose connector (16) into the inlet (17) of the appliance.
• Line up the hose connector tabs with the slots in the inlet.
• Slide the hose further until the release buttons (18) (2 positions) click into place.
• To disconnect the hose, press the release buttons (18) (2 positions) and pull out the
hose.
Mounting the extension tube (fig. A)
• Press the lock button (19) and slide the hose nozzle (20) into the tube (10) until it
clicks into place.
• To remove the tube (10), press the lock button and pull the hose nozzle (20) out of the
tube.
Mounting the multi surface suction head (fig. A)
The multi surface suction head (7) allows for vacuuming on carpet and hard surfaces
(e.g. laminate and tiles).
• Press the lock button (21) and slide the tube (10) into the head (7) until it clicks into
place.
• To remove the head (7), press the lock button (21) and pull the tube (10) out of the
head (7).
Assembly
90518824 CAN. CANNISTER VAC 10/28/08 10:40 AM Page 8