KitchenAid KPCG100, 87 Adjusting to Provide Coarser Grinds, ADjusting the cutting burrs, English

ADjusting the cutting burrs

ENGLISH

5.Rotate the grind control gear clockwise one “click” or detent at a time until you hear the burrs touching one another – when they touch, the burrs will make a distinct “rubbing” or grating sound.

6.When the burrs are touching, turn the grind control gear counter-clockwise one “click” or detent. The grating or “rubbing” sound will stop. Turn off the mill by flipping the On/Off Switch to the “Off” position. The mill is now calibrated to provide maximum fineness.

7.Re-attach the grind control dial, making certain the dial indicator points to grind level “8”.

NOTE: If the Burr Coffee Mill produces a grating or “rubbing” sound during use, the burrs have been improperly adjusted. To avoid damage to the burrs, readjust the burrs immediately.

Adjusting to Provide

Coarser Grinds

When the Burr Coffee Mill is adjusted to provide coarser grinds, grind sizes will increase throughout the grinding range and the finest level may become too coarse for espresso. (To re-calibrate the Burr Coffee Mill for maximum grind fineness, see page 9.)

1.Turn the grind control dial to level “1”.

2.Using a 5⁄32-inch (4 mm) allen wrench or hex-head screwdriver, remove the screw located in the front of the grind control dial by turning it counter-clockwise. Once the screw is free, remove the grind control dial. The white grind control gear should be visible once the dial is removed.

3.Rotate the grind control gear counter- clockwise one “click” or detent at

a time until the “clicking” sound diminishes and the gear offers little resistance to being turned.

4.Re-attach the grind control dial, making certain the dial indicator points to level “1”.

10