Cub Cadet CS 2210, CS3210 warranty Assembly & Set-Up, Contents of Carton

Assembly & Set-Up

3

Contents of Carton

•	One Chipper Shredder	•	One Operator’s Manual	•	One Engine Operator’s Manual
•	One Tow Bar	•	One Bag	•	One Safety Glasses

•One Bottle of Oil

Assembly

NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your chipper shredder.

Bag

To attach the bag:

1.Place the opening of the bag completely over the chute deflector. See Fig. 3-2.

Chipper Chute (Model Series CS 3210 Only)

For shipping reasons, the unit is crated with its chipper chute in a raised position. To pivot it downward, proceed as follows:

1.Pull the spring latch upward.

2.Gently pivot the chipper chute down until it clicks into the lock rod. See Fig. 3-1.

A

B

Figure 3-1

WARNING: Never operate the chipper shredder with the chipper chute in the raised position. Doing so may result in property damage or serious injury to the operator or bystanders.

Figure 3-2

2.Position the bag so that the wing knobs which secure the chute deflector to the impeller housing are completely covered.

3.Pull on the draw-strap until the bag is tight around chute deflector opening.

7