Cub Cadet CS 2210, CS3210 warranty Do not modify engine, Spark Arrestor

Models: CS 2210 CS3210

1 40
Download 40 pages 35.13 Kb
Page 5
Image 5

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Allow machine to cool at least 5 minutes before storing.

9.Always refer to the operator’s manual for proper instructions on off-season storage.

10.If the fuel tank has to be drained, do this outdoors.

11.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

12.According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection Agency (EPA), this product has an Average Useful Life of seven (7) years, or 60 hours of operation. At the end of the Average Useful Life have the machine inspected annually by an authorized service dealer to ensure that all mechanical and safety systems are working properly and not worn excessively. Failure to do so can result in accidents, injuries or death.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice Regarding Emissions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and

may include the following emission control systems: Engine Modification (EM), Oxidizing Catalyst (OC), Secondary Air Injection (SAI) and Three Way Catalyst (TWC) if so equipped.

Spark Arrestor

Warning: This machine is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered,

brushcovered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

Section 2 — Important Safe Operation Practices

5

Page 5
Image 5
Cub Cadet CS 2210, CS3210 warranty Do not modify engine, Spark Arrestor

CS 2210, CS3210 specifications

Cub Cadet has earned a reputation in the lawn care and outdoor power equipment market for producing reliable and high-performance machinery. The Cub Cadet CS3210 and CS2210 models are no exception, standing out as premier options for both residential and commercial users seeking versatility and efficiency in their operations.

The CS3210 is equipped with a powerful 31-horsepower Kohler engine, delivering exceptional performance and reliability. This engine is designed to handle various mowing conditions, making it suitable for handling both thick grass and uneven terrain. The CS2210, while slightly smaller, boasts a strong 22-horsepower engine that efficiently manages medium-sized yards without compromising performance.

A standout feature of both models is their advanced hydrostatic transmission, which allows for smooth, effortless driving. This system enhances user comfort, especially during extended mowing sessions, by providing seamless shifting and superior maneuverability. Users will appreciate the easy-to-use foot-operated controls that allow for precise speed adjustments.

Both the CS3210 and CS2210 come with a durable, reinforced cutting deck, which ensures a clean cut and improved grass mulching. The cutting deck features a stamped design that enhances airflow, promoting better clippings distribution. With adjustable cutting heights, users can customize their mowing experience to achieve a tailored finish that suits their lawn preferences.

In addition to mowing, these models offer flexibility for various lawn care tasks. They can be equipped with a variety of attachments, including baggers, snow throwers, and tillers, transforming them into multi-functional machines capable of handling seasonal chores and yard work.

Safety is a top priority with both the CS3210 and CS2210. Each model is designed with user-friendly controls and features such as a safety switch that prevents accidental starts, enhancing the overall user experience while ensuring peace of mind.

Overall, the Cub Cadet CS3210 and CS2210 are robust, reliable, and versatile lawn tractors designed to tackle a range of outdoor tasks. With their powerful engines, advanced transmissions, and durable construction, they represent a solid investment for anyone looking to maintain their lawn efficiently. Whether you're a homeowner or a professional landscaper, these models provide the features and technology necessary to achieve top-notch results.