Hitachi GR2000-B Series quick start Chapter Basic Operations, Configuration Examples

Chapter 3

Basic Operations

This chapter shows examples of the commands required for connecting the GR2000-B to other devices. The chapter contains the following sections:

￿Configuration examples

￿Startup of the GR2000-B

￿Configuration setting

￿Display of the operation status

￿Details about the commands introduced in this chapter

￿More details about the operation

3.1Configuration Examples

Using the example below, this section explains about the simple method of setting configurations.

Network A Network B Network C

Server

PC

PC

GR2000-B

Built-in Ethernet	Built-in Ethernet
Port 0	Port
IP 192.168.1.1	IP 192.168.2.1

Peer Router

PC

PC

Figure 3-1 Example of a GR2000-B Connecting to Other Devices

To construct the configuration above in Figure 3-1,set the GR2000-B according to the following instructions:

￿Set IP address "192.168.1.1" for PORT 0 of the GR2000-B built-in Ethernet.

￿Set IP address "192.168.2.1" for PORT 1 of the GR2000-B built-in Ethernet.

￿Set IP address "192.168.2.2" for a default route (in case that the IP address "192.168.2.2" is set for the port of the peer router.)

GR2K-GA-0008	3-1
Rev. 1.00