Hitachi Gigabit Router GR2000-B Series Quick Start Guide
Specific Warning Instructions
DANGER: Failure to follow the instructions in this section could cause bodily injury or death to the user.
Do not operate the device if you suspect damage or failure.
Do not use the device if there is smoke or an unusual smell coming from the system. If either occurs, immediately turn power off and unplug the power cable from the outlet. Contact a qualified service technician.
In the case of the
If the device is installed in a rack, unplug the device power cable from the rack outlet. If the component with the problem cannot be identified, remove all power cables from the rack outlet. Contact a qualified service technician.
In the case of redundant power supplies, make sure that ALL switches and circuit breakers are turned off.
If the device is dropped and any part is broken, turn the power switch off, unplug the power cable from the outlet, and contact service. Continued use may cause fire or electric shock.
Do not use any unspecified power source or power voltage. Observe all terminal ratings and markings on the product.
To prevent electric shock, use only grounded power outlets when using AC power. Do not overload power outlets. In the case of DC power or the
Do not use adapters to connect multiple power cables to the same outlet. Use standard safety procedures with the power cable.
Use only the power cable supplied with the device. Use of other cables may cause fire or electric shock. Keep the power cable away from extreme heat.
Similarly, do not use the provided power cable for products other than the GR2000, since this could cause a fire or electrical shock hazard.
Do not operate the device in wet or damp conditions
If liquid is spilled on the device, turn power off and unplug the power cable from the outlet. Discontinue use to avoid the risk of fire or electric shock.
Place device on a stable, level surface. Do not place or stack objects on top of the device.
If a foreign object falls into the device, turn power off and unplug the power cable from the outlet. Do not attempt to remove the object while the power is on.
Do not remove the device’s cover while the device is in operation.
Touching internal parts may cause electric shock. Contact a qualified service technician for any internal inspection, adjustment or repair. Do not modify the device. Doing so may cause fire or electric shock.
Do not insert any foreign objects into the device or the ventilation slots. Doing so may cause fire or electric shock.
Do not insert hands or any other object into a fan.
Do not allow unauthorized users of the device to pull out boards or power supplies at any time.
Do not set the GR2000 in a dusty or humid location. Doing so may cause fire or electric shock.
x | |
| Rev. 1.00 |
