Chapter 2
Setup Process
This chapter explains briefly about the whole process from unpacking a product package to powering up the
2.1, “Check that All Necessary Components are Present,” on page
2.2, “Assemble the Required Tools for Setup.,” on page
2.3, “Setting Up the
2.4, “Dangers, Cautions, and Notes Regarding Setup,” on page
2.5, “Installing the
2.6, “Attaching and Detaching the Power Cable,” on page
2.7, “Installing a Memory Card,” on page
2.8, “Software,” on page
2.9, “The Setup Terminal and Cable Connections,” on page
2.10, “Normal
2.1Check that All Necessary Components are Present
Before you unpack the
2.2Assemble the Required Tools for Setup.
Make sure you have the following tools before you begin setup. The only tools required to install and set up a
A #2 Phillips screwdriver for attaching the
A
| |
Rev. 1.00 |
|
