![Maintenance](/images/new-backgrounds/43829/4382917x1.webp)
Maintenance
WARNING: Never attempt to service heater while it is connectedtopropane/LPsupply, operating, or hot. Severe burns can occur. Any guard or other protective device removed for servicing must be replaced prior to operating the heater.
1.Keep heater clean. Remove any debris from ventilation openings.
2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak that must be corrected. Correct all leaks at once.
3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace it immediately. At least annually, remove hose/regulator assembly from heater to inspect entire length of hose. Replacement hose must be same type as supplied with unit.
4.Spiders and insects can create a danger- ous condition that may damage heater or make it unsafe. Keep burner area clean of all spiders, webs, or insects.
5.Have heater inspected yearly by a quali- fied service person.
Specifications
•Rating: High - 36,500 Btu/Hr (10.7 kw) Low - 20,000 Btu/Hr (5.86 kw)
•Fuel: Propane Vapor Only
•Fuel Consumption/Hour: Min. 0.22 gal (0.83 liter), Max. 0.39 gal (1.48 liter)
Min. 0.93 lb (0.42 kg), Max 1.67 lb (0.76 kg)
•Supply Pressure (To Regulator): Maximum - 200 psi (1,379 Kpa) Minimum, for input adjustment - 5 psi (34.5 Kpa)
•Manifold Pressure: High - 1 psi (6.89 kPa), Low - 0.98 psi (6.77 kPa)
•Ignitor Gap: 0.120"
•Minimum Temperature:
•Heater Size (L x W x H):
18" x 17.125" x 82" (0.45 x 0.43 x 2.1 m)
•Carton Size (L x W x H):
38.625" x 18.125" x 18" (0.98 x 0.46 x 0.45 m)
•Heater Weight: 96 lb (43.5 kg)
•Shipping Weight: 110 lb (49.9 kg)
Wiring Diagram
Electronic
Ignitor
Brown
Ignitor Electrode
Gas Light
Burner
|
|
|
|
|
White |
| White | ||
|
|
|
|
|
I S
Control Module
White
Thermocouple
Ground
Brown
Ground
Gas Valve
Black
Orange Control
Valve
Brown
Brown
Red
BlackBattery
Holder
ON/OFF
Switch