SAFETY INFORMATION

Continued

a safety relief device having a direct com- munication with the vapor space of the cylinder. The cylinder used must include a collar to protect the cylinder valve. The cylinder must be equipped with a listed over filling protection device.

3.Keep appliance area clear and free from combustible materials, gasoline, paint thinner and other flammable vapors and liquids. Dust is combustible. Do not use heater in areas with high dust content.

4.Minimum heater clearances from com- bustibles: Back 4" (10.2 cm), Sides 12" (30.5 cm); Front 42" (1.07 m); Top 16" (40.6 cm) (see Figure 1).

5.Before each use, check heater for leaks. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

6.Keep propane/LP cylinder below 100° F (38° C).

7.Use only the hose and factory preset regulator provided with the heater. Do not adjust regulator as gas leaks may occur.

8.Locate hose properly, keeping it out of pathways where people may trip over it or in areas where the hose may be subjected to accidental damage.

9.Check hose before each use of heater. Disconnect hose with 9/16" wrench. Check for tears and abrasions in hose and on regulator. If highly worn or cut, replace with hose specified by manufacturer be- fore using heater.

10.Do not alter heater. Keep heater in its origi- nal state. Do not use heater if altered.

11.Locate heater on stable and level surface.

12.Do not operate heater while sleeping or leave heater unattended.

13.Never move, handle or service a hot or operating heater. Severe burns may result. You must wait 20 minutes after turning heater off.

14.To prevent injury, wear gloves when han- dling heater.

15.Turn off heater valve and gas supply to heater when not in use.

16.Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use generic parts. Improper replacement parts could cause serious or fatal injuries.

17.Certain materials or items, when stored in front of heater, will be subjected to radiant heat and could be seriously damaged.

18.Shut heater off immediately if flashback occurs (flame inside burner tube). Have heater serviced.

19.Never attempt to use heater or any components that have been damaged or exposed to accidental fire.

20.If you smell gas or suspect a leak, shut off propane/LP cylinder valve at once. Ventilate area. Do not strike a match or create any flame or electric spark. Find and correct leak before attempting to light any appliance.

21.Do not block intake air openings.

Any guard or other protective device removed for servicing must be re- placed prior to operating the heater.

Surface temperatures become very hot when operating heater. Children and adults should stay away to avoid burns or clothing ignition.

Young children should be carefully supervised when they are in the area of the heater.

16" (40.6 cm)

12"

4"

(30.5 cm)

(10.2 cm)

42"

12"

(30.5 cm)

(1.07 m)

 

Figure 1 - Clearances from Combustibles

118994-01Gwww.desatech.com

Page 2 Page 4
Page 3
Image 3
Desa TD100, TD102, TD104, TD110, Td104, Td102, Td100 owner manual Keep propane/LP cylinder below 100 F 38 C, 16 40.6 cm, 07 m
Page 2 Page 4

TD100, TD102, TD104, TD110, Td100, Td102, Td104 specifications

Desa TD104, TD100, TD102, TD110 are part of an innovative lineup of industrial engines manufactured for various applications in agricultural machinery, construction equipment, and other heavy-duty vehicles. These engines are designed to deliver high performance, durability, and efficiency, catering to an array of operational requirements.

One of the prominent features shared by the Desa TD series is their robust engine design, which ensures longevity and reliability under demanding working conditions. These engines are built with high-quality materials that withstand wear and tear over time, making them suitable for rugged environments.

The TD100 and TD102 models are particularly noted for their compact size and lightweight construction, which enhance their versatility in applications ranging from small tractors to auxiliary power units. The TD104 engine, on the other hand, offers a higher displacement, providing more power for larger machinery and heavy lifting.

The technology utilized in these engines includes advanced fuel injection systems that optimize fuel consumption while minimizing emissions. This makes the TD series environmentally friendly, meeting stringent emission regulations without compromising performance. Additionally, the engines are equipped with intercoolers, which allow for increased air density, resulting in improved combustion efficiency and power output.

A significant characteristic of the Desa TD series is their ease of maintenance. The layout of the components has been designed to provide accessibility, reducing downtime during servicing. Features like easily replaceable filters, serviceable valves, and user-friendly control panels make it easier for operators to maintain these engines.

Another notable feature is their capability to operate at various altitudes and temperatures, ensuring reliable performance irrespective of external conditions. The TD110, in particular, is equipped with advanced cooling systems that manage engine temperature effectively, even under heavy load.

In conclusion, the Desa TD series, including models TD100, TD102, TD104, and TD110, combines high performance, advanced technologies, and user-centric design. This makes them suitable for a wide variety of applications, ensuring they meet the needs of modern industrial operations while offering low operational costs and enhanced durability. As industries continue to evolve, these engines stand as a testament to efficiency and innovation in engine technology.
Top Page Image Contents