Samsung SCX-4100 manual Clearing LCD Error Messages, Display Meaning Suggested solutions

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to indicate the machine’s status or errors. Refer to the following table to understand the message’s meaning and correct the problem, if necessary. Messages and their meanings are listed in alphabetical order.

Display	Meaning	Suggested solutions
Door Open	The front or rear cover is not	Close the cover until it locks
	securely latched.	into place.
[JAM 1] or	The toner cartrige is not	Install the toner cartridge. See
[No Cartridge]	installed.	page 1.6.
Low Heat Error	There is a problem in the	Unplug the power cord and
Open Heat Error	fuser unit.	plug it back in. If the problem
		persists, please call for
[Over Heat]
		service.
	A problem has occurred in	Unplug the power cord and
[LSU Error]	the LSU (Laser Scanning	plug it back in. If the problem
	Unit).	persists, please call for
		service.
No Paper	The paper tray has run out	Load paper in the paper tray.
[Add Paper]	of paper.	See page 1.8.
Paper Jam 0	Paper has jammed in the	Clear the jam. See page 8.2.
	feeding area of the paper
Open/Close Door
	tray.
	• Paper has jammed in the	• Clear the jam. See page 8.5.
	fuser area.
Paper Jam 1	• A paper jam has occurred	• Clear the jam. See page 8.6
	in the manual feeder or
Open/Close Door
	the machine detects non-
	feeding from the manual
	feeder.
Paper Jam 2	Paper has jammed in the	Clear the jam. See page 8.3.
Check Inside	paper exit area.

8.8TROUBLESHOOTING