Using the Manual Feeder
Use the manual feeder to print transparencies, labels, envelopes |
|
or postcards in addition to making quick runs of paper types or |
|
sizes that are not currently loaded in the paper tray. | 2 |
Postcards, 3.5 by 5.83 in.(index) cards and other |
materials can be printed with this printer. The minimum size is 76 by 127 mm (3.0 by 5.0 in.) and the maximum size is 216 by 356 mm (8.5 by 14 in.).
Acceptable print materials are plain paper with sizes ranging from 100 x 148 mm (3.9 x 5.8 in.) to Legal, 216 x 356 mm (8.5 x 14 in.), the largest size acceptable, and weighing between 16 lb and 32 lb.
NOTES:
•Always load only the print materials specified in the Specifications on page A.5 to avoid paper jams and print quality problems.
•Flatten any curl on postcards, envelopes and labels before loading them into the manual feeder.
•When you print on 76 mm X 127 mm (3 X 5 in.) sized media with loading into the tray, open the rear output tray.
1Load a sheet of the print material with the print side face up into the center of the manual feeder.
For envelopes, load a sheet with the flap side face down and with the stamp area on the top left side.
For transparencies, hold them by the edges and avoid touching the print side. Oils from your fingers can cause print quality problems.
For letterhead, load a sheet with the design face up, top edge towards the printer.
