Siemens MC35 Event Response Commands, Atsstr Remote-SAT Event Response Menu Selection, ATSSTR=232

Remote-SAT User's Guide

1.5.3 Event Response Commands

The following types of responses are neither issued in reaction to a formerly given notification (^SSTN) nor a AT^SSTGI sequence. These responses are intended to report activities at the external application, e.g. when the user is pressing a key.

1.5.3.1 AT^SSTR Remote-SAT Event Response – Menu Selection (211)

Write command

AT^SSTR=211,

<status>, < itemId >

Reference

Siemens

The TA specifies a user´s selection of an item from the main menu, that was set up using SETUP MENU command. Alternatively help can be requested.

Response

OK

Parameters

<cmdType> 211 – Proactive command ID, see Table 1

<status> Unsigned Integer, range 0-255

0 Command performed successfully.

19Help information required by the user, no other value can be input.

<itemId> Id of selected item (1-255)

Note

1.5.3.2 AT^SSTR Remote-SAT Event Response – User Activity (232)

Write command	Sent by the customer application to indicate that a key has been pressed.
AT^SSTR=232
	Response
	OK
	Parameters
	<cmdType> 232 – Event command ID, see Table 1
Reference	Note
Siemens

MC35_SAT_01_v02.00 Page 56 of 65 11.01.2002