Siemens MC35 manual Atsstgi Remote-SAT Get Information Send Dtmf, ATSSTGI=20

Remote-SAT User's Guide

1.4.8 AT^SSTGI Remote-SAT Get Information – Send DTMF (20)

Write command

AT^SSTGI=20

This command is to be used upon receiving an unsolicited result code ^SSTN:20.

The SIM Application is sending DTMF tones to the network, and can provide the TA with some information about this.

Text and an Icon Identifier can be passed to the TA to display to the user.

Response

^SSTGI: <cmdType>, <commandDetails>, <text>, <iconQualifier>, <iconId> <CR> <LF>

Parameters
<cmdType>	20 – Proactive command ID see Table 1
<commandDetails>	This byte is RFU.
<text>	String to provide user with information.
<iconQualifier>	Unsigned Integer, range 0 – 255, used as a bitfield.
	bit 1:	0 = icon is self explanatory and replaces text
		1 = icon is not self-explanatory and shall be
		displayed with the text
		Determined value only if associated icon id is
		not 0 (an icon exists).
	bits 2-8: = RFU
<iconId>	0-255, 0: no icon

ReferenceNote

Siemens

MC35_SAT_01_v02.00 Page 31 of 65 11.01.2002