Siemens MC35 manual Atsstr Remote-SAT Response Set Up Menu, ATSSTR=37

Remote-SAT User's Guide

1.5.2.13 AT^SSTR Remote-SAT Response – Set Up Menu (37)

Write command

AT^SSTR=37,

<status>

Note:

As with every proactive command the TA is expected to acknowledge the ^SSTGI response with AT^SSTR to confirm that the proactive command has been executed.

The response simply conveys, to the SAT, the information that the main menu was received and set up on the user interface. It does not transmit any information about a selected item, like in the case of AT^SSTR=36.

Once this command was executed the user can proceed as described in the Chapter “AT^SSTR Remote-SAT Event Response – Menu Selection (211)”, pg. 56.

Response

OK

Parameters

<cmdType> 37 – Proactive command ID, see Table 1.

<status> Unsigned Integer, range 0-255

0	Command performed successfully (Proactive session will
	end).
32	TA currently unable to process command

132TA currently unable to process command because screen is busy.

ReferenceNote

Siemens

MC35_SAT_01_v02.00 Page 54 of 65 11.01.2002