15. SET UP MODE |
15. SET UP MODE
15. SET UP MODE
In the Set Up Mode, the date/time, print format, bar code type, print titles, password, and various data, are programmable also reading/writing data from/to the memory card is possible.
CAUTION!
Do not change the Initial settings of the set up menu. This item is intended for the service personnel. Changing these settings could cause a malfunction of the machine.
The following table shows the keys to be used throughout the Set Up Mode. In addition, many other keys appear on various screens. For details, refer to each screen’s description.
Key Functions
Key | Function |
SORT | Used to defragment the data in the flash ROM. |
| Since this machine uses the flash ROM, repeated data input may disable the data entry |
| in spite of sufficient memory capacity. |
| When the [SORT] key is touched, the confirmation screen will appear. To execute, |
| touch the [GO] key, or [CANCEL] key to cancel. |
| It takes a while to complete the data sort. |
BACK | Used to show the previous screen. |
0 - 9 | Used to input numeric data. Input number is displayed on the Numeric Display on the |
| left side of the [1] key. |
C | Used to clear the input numeric data. |
| Used to scroll the screen. |
To enter the Set up mode, input the master password or the password you programmed, and touch the [SET UP] key of the main menu. When the following Set up menu is displayed, touch the programming item key you desire to enter.
Set up Item key | BACK key |
| |
| Scroll Bar |
Numeric keys
Numeric Display
Clear key
NOTE: Regarding the master password, please contact the nearest TOSHIBA TEC service representative or sales agent.
15- 1
