Toshiba SL-5300 Series Auto Code UPC Code, Mode Flag, Touch the Weigh, Fix price, or By count key

15. SET UP MODE		EO1-31009
		15.5 PLU Data Maintenance
Procedure
Item		Procedure
Changing the PLU data	1. Select a desired item key. (only one item)
	2.	The selected item appears on the Appointed data area.
	3.	Input the start PLU No.
	4.	Input the end PLU No.
	5. Touch the Data code area or Data contents area to enter a number
	of data.
	NOTE: Data setting procedure differs depending on the data to be
	changed. Refer to the following pages. See also Section 14.2 for the
	max. values and notes.
	6.	Touch the [GO] key to change the data.

1) Auto Code (UPC Code)

(1)Touch the [AUTO CODE] key.

(2)When the Data contents area is touched, the Auto Code Setting screen will appear.

(3)Input a numeric data and touch the [Decision] key.

Decision key

AUTO CODE key

Data contents area

2) Mode Flag

(1)Touch the [MODE FLAG] key.

(2)When the Data contents area is touched, the Mode Flag Setting screen will appear.

(3)Touch the [Weigh], [Fix price], or [By count] key.

MODE FLAG key

Data contents area

15-41