Toshiba SL-5300 Series owner manual DEPT. Total, 100’ Hourly Total

19. REPORT/RESET MODE		EO1-31009
	19.1 Label Mode Total Memory Report/Reset
Procedure (continued)
Item	Procedure
DEPT. TOTAL	When using the Report No.
	1. Input the Report No. (max. 4 digits) with the numeric keys, and then touch
	the Report No. area.
	NOTE: For the Report No., refer to the Table in Section 14.11.
	2. (When specifying the code area)
	Input the Start Code (max. 2 digits) and touch the START CODE area.
	Then input the End Code (max. 2 digits) and touch the END CODE area.
	3. To display the report on the screen, touch the [ON SCREEN] key.
	To print the report on the journal paper, touch the [PRINT] key.
	When selecting the total type on the screen
	1. Touch the [DEPT. TOTAL] key.
	2. Memory type selection
	Touch the [NORMAL], [REWRAP], or [MARKDOWN] key.
	3. Analysis type selection
	Touch the [CODE ORDER], [PACKAGE ORDER], [WEIGHT ORDER],
	[PIECES ORDER], or [AMOUNT ORDER] key.
	4. Data type selection
	Touch the [ALL], [ZERO SKIP], [ZERO], [BEST] or [WORST] key.
	NOTE: As an example, to specify the output area “Best 10” or “Worst 10”,
	enter 10 with the numeric keys and then touch the [BEST] or
	[WORST] key, respectively.
	5. (When specifying the code area)
	Input the Start Code (max. 2 digits) and touch the START CODE area.
	Then input the End Code (max. 2 digits) and touch the END CODE area.
	6. To display the report on the screen, touch the [ON SCREEN] key.
	To print the report on the journal paper, touch the [PRINT] key.
HOURLY TOTAL	When using the Report No.
	1. Input the Report No. (max. 4 digits) with the numeric keys, and then touch
	the Report No. area.
	NOTE: For the Report No., refer to the Table in Section 14.11.
	2. To display the report on the screen, touch the [ON SCREEN] key.
	To print the report on the journal paper, touch the [PRINT] key.
	When selecting the total type on the screen
	1. Touch the [HOURLY TOTAL] key.
	2. Memory type selection
	Touch the [NORMAL], [REWRAP], or [MARKDOWN] key.
	3. To display the report on the screen, touch the [ON SCREEN] key.
	To print the report on the journal paper, touch the [PRINT] key.
100’ HOURLY TOTAL	When using the Report No.
	1. Touch the [100’ HOURLY] key or input the Report No. (max. 4 digits) with
	the numeric keys then touch the Report No. area.
	NOTE: For the Report No., refer to the Table in Section 14.11.
	2. To display the report on the screen, touch the [ON SCREEN] key.
	To print the report on the journal paper, touch the [PRINT] key.
	3. (After you touch the [ON SCREEN] key)
	Enter the desired PLU No. with the numeric keys, and then touch the PLU
	No. area.

19- 6