Toshiba SL-5300 Series owner manual Print coordinate diagram

15. SET UP MODE		EO1-31009
		15.2 Label Format Setting
Item		Procedure
Label length	1. Input a value. (300 – 2000)
	2.	Touch the Label length area.
	NOTE: The unit of the value is 0.1 mm. Refer to the Print coordinate
	diagram.
Label width	1. Input a value. (480 – 800)
	2.	Touch the Label width area.
	NOTE: The unit of value is 0.1 mm. Refer to the Print coordinate diagram.
Gap	1. Input a value. (0 – 30)
	2.	Touch the Gap area.
	NOTE: The unit of value is 0.1 mm. Refer to the Print coordinate diagram.
X position fine adjustment	1. Select the adjustment direction by touching the [+] or [-]key.
	[+]: Right
	[-]: Left
	2.	Input a value. (0 – 20)
	3.	Touch Fine adjustment area.
	NOTES:
	1. The unit of value is 0.1 mm.
	2. When the value is 0, the adjustment direction key is fixed to the [+] key.
Print coordinate diagram

Label Length

	Gap
Y
	Feed Direction
(0, 0)	X
	Label Width

15- 5