
14. PROGRAMMING MODE | |||
|
| 14.2 PLU Data Setting | |
|
|
|
|
|
|
|
|
| Item | Procedure | |
|
|
| |
| FSP (Frequent Shoppers) To set the sale promotion schedule No.: | ||
1. | Input a schedule No. (1 – 99)* | ||
2. | Touch the FSP schedule area. | ||
| Or, | ||
1. | Touch the FSP schedule area. | ||
2. | The schedule list will appear. | ||
3. | Touch the desired schedule from the list. |
For details of the schedule, refer to Section 14.17.
To set the discount amount:
1.Input a numeric data (max. 999.99).
2.Touch the Discount area (left side).
To set the discount rate:
1.Input a numeric data (max. 99.9%).
2.Touch the Discount area (right side).
NOTES:
1.With the initial settings, the FSP function is not available. When this function is required, contact the nearest TOSHIBA TEC service representative or sales agent.
2.For the BONUS logo and FSP logo settings, refer to the NOTES for the LOGO setting on the following page. However, the logo print area is limited to the following size:
104 dots
| 118 dots |
|
| 64 dots |
|
|
| ||
|
|
|
| |
|
|
|
| |
|
| 256 dots | ||
| 3. The Bonus logo’s print area is shared by LOGO 3. Usually LOGO 3 takes | |||
| precedence over the Bonus logo except during the FSP schedule time | |||
| range. | |||
| 4. The FSP logo’s print area is shared by Coupon logo. Usually Coupon | |||
| logo takes precedence over the FSP logo except during the FSP schedule | |||
| time range. | |||
|
|
|
|
|
Shortened Commodity | 1. Touch the Shortened commodity name area. | |||
Name | 2. Input a short commodity name (max. 24 characters) on the Edit | |||
| screen. |
NOTE: When the commodity name is shortened by using the [Comm. Short] key, the first 24 characters of the commodity name are automatically displayed in the Shortened commodity name area.
*: To clear the entered number, input “0”.
14- 9