Toshiba SL-5300 Series owner manual Procedure

14. PROGRAMMING MODE						EO1-31009
						14.2 PLU Data Setting
	Item				Procedure
	LOGO	1. Input a logo number (0000 – 9999)
		2. Touch the LOGO area.
		Or,
		1. Touch the LOGO area.
		2. The logo list will appear.
		3. Select the desired logo number
		from the list.
		NOTES:
		1. Max. 3 logos can be set to one PLU.
		2. Logos can be called only from the flash memory card (ATA card).
		3. File format, file name, and size of the logos should meet the following:
			Format: Windows BMP, monochrome
			File name: LOGOxxxx.BMP (xxxx is any 4-digit number and will be a code
			number)
			Size: Max. 600 dots (W) x 400 dots (H) (Both numbers must be multiple of
		8.)
		4. 1 pixel = 0.125 mm
			For example, a 320-dots by 240-dot logo data will be printed as 40 mm by
			30 mm.
		5. Printable logo width differs depending on the label width.
			Label width	Printable logo width	Print size
			80 mm	600 dots	75 mm
			57 mm	440 dots	55 mm
			48 mm	380 dots	47.5 mm
			Logos which are larger than the above size can be programmable,
			however, the part outside the specified size will not be printed.
	Safe Handling Instructions	1. Input a safe handling instruction number (0 – 10).
		2. Touch the SAFE HANDLING area.
		NOTES:
		1. Safe handling instructions can be called only from the flash memory card
		(ATA card).
		2.For the safe handling instruction’s format and size, refer to the NOTES for
		the LOGO setting. However, the file name should be set as follows:
		File name: Shi00xx.bmp (xx is 2-digit number from 02 to 10)
		3. Safe handling instruction No. 0 means that nothing is printed.
		2. Safe handling instruction No. 1 means that the scale’s default data is
		printed.

14- 10