Toshiba SL-5300 Series owner manual During printing Completion of the printing

16. REGISTRATION MODE EO1-31009

16.3 By-Count Operation

6.After calling the PLU, touch the [PRESET COUNT] key and input the number of labels to be issued.

(Refer to Step 3.)

NOTES:

1.Repeating Steps 5 and 6 allows specifying up to 30 PLUs.

2.To cancel the specified PLU individually, input 0 and touch the Count area of that PLU.

(e.g.: To delete PLU No. 910001, Orange) The cancelled PLU is deleted and list is shifted up.

PRINT key

7.After specifying all of the PLU’s and the number of labels to be issued, touch the [PRINT] key. The display will change to the Registration Mode initial screen, issue the 1st label (regardless of the AUTO/MANUAL Mode setting) and display “PRESS * TO PRINT”. If Label Issue Mode is set to MANUAL, you must remove the printed label and press the [PRT/*] key to issue the next label.

This process is repeated until all programmed labels are printed. If Label Issue Mode is set to AUTO, when the 1st label printed is removed the next label is automatically issued. This process is repeated until all programmed labels are printed.

During printing Completion of the printing

VOID key

CLEAR key PRT/* key

16-37