
| 15. SET UP MODE | ||
|
| 15.2 Label Format Setting | |
|
|
|
|
| Key Functions |
|
|
| Key | Function |
|
| SORT | Used to defragment the data in the flash ROM. |
|
|
| Since this machine uses the flash ROM, repeated data input may disable the |
|
|
| data entry in spite of sufficient memory capacity. |
|
|
| When the [SORT] key is touched, the confirmation screen will appear. To |
|
|
| execute, touch the [GO] key, or [CANCEL] key to cancel. |
|
|
| It takes a while to complete the data sort. |
|
| FREE FORMAT | Used to show the free format screen. See Section 15.2.1. |
|
| FORMAT LIST | Used to show the label format list. See Section 15.2.2. |
|
| FORMAT COPY | Used to copy the label format to other format No’s. See Section 15.2.3. |
|
| FORMAT PRINT | Used to print the format. |
|
| FORMAT RESET | Used to reset the format to the default. See Section15.2.4. |
|
| TEST PRINT | Used to print a sample label. |
|
Procedure
Item |
| Procedure |
Format No. | 1. | Input a format No. |
| 2. | Touch the Format No. area. |
| NOTE: Format No’s. 0, 20 – 31, 40 – 47, 60 – 68, and 81 – 88 have been | |
| prepared as templates (Refer to Label Format on page | |
Format name | 1. | Touch the Format name area. |
| 2. | The format name edit screen will appear. |
| 3. | Enter a new format name. |
Feed length | 1. | Input a value. (0 – 200) |
| 2. | Touch the Feed length area. |
| Or, | |
| Adjust the value with the [+], | |
| NOTES: | |
| 1. The unit of the feed length value is 0.1 mm. | |
| 2. Touching [+] or | |
| to the position you touched. | |
Sensor sensitivity | Touch the [HIGH] or [LOW] key depending on the label type to be used. | |
| NOTE: | |
| High sensitive labels (VHTS, VHNS): HIGH (print speed = 4”/sec.) | |
| Low sensitive labels (GFTS, GFNS): LOW (print speed = 3”/sec.) | |
Print density | 1. | Input a value. (0 – 20) |
| 2. | Touch the Print density area. |
| Or, | |
| Adjust the print density with the [LIGHT], [DARK], or [ ]. | |
| NOTES: | |
| 1. The initial value is 10. | |
| 2. Touching the [LIGHT] or [DARK] key one time causes one change. The | |
| [ | ] jumps to the position you touched. |
Print type | Touch the [On demand] (strip), [Batch] (continuous), or [Variable] | |
| (variable length label) key. | |
Sensor type | Touch [Front label sensor], [Transparent sensor], or [Preprint] key. |
NOTES:
1.The [Front label sensor] cannot be selected when the print type is set to Batch. Touching the [Front label sensor] when Batch is selected automatically changes the print type to On demand.
2.When [Variable] is selected for the print type, no sensor type is selectable.
15- 4