Toshiba SL-5300 Series owner manual Procedure

14. PROGRAMMING MODE	EO1-31009
	14.2 PLU Data Setting
Item	Procedure
Tare,	Input a numeric data (max. 2lb for lb scale, 1kg for kg scale, or 99.9%
%Tare	for %Tare).
	NOTES:
	1. With the initial settings, Preset tare and %Tare function is not available.
	When these functions are required, contact the nearest TOSHIBA TEC
	service representative or sales agent.
	2. %Tare data exceeding the tare limit results in an error.
	3. When the NET statement labels are to be issued, enter the net weight (0 –
	480 oz) to the PLU tare area.
Tare Limit	1. Input a numeric data in the following range:
	Lb scale: 0.000 – 2.000lb (Default: 2.000lb)
	Kg scale: 0.000kg – 1.000kg (Default: 1.000kg)
	2. Touch the Tare Limit area.
	3. The confirmation screen will appear.
	4. Touch the [Go] key to enter the data. To cancel, touch the [Cancel]
	key.
	NOTES:
	1. With the initial settings, this function is not available. When this function is
	required, contact the nearest TOSHIBA TEC service representative or sales
	agent.
	2. If the actual tare exceeds the tare limit, an error occurs.
Compulsory tare	Select YES or NO.
subtraction	YES: Tare subtraction is compulsory.
	NO: Tare subtraction is not compulsory.
	NOTE: With the initial settings, YES cannot be selected. When this function
	is required, contact the nearest TOSHIBA TEC service representative or
	sales agent.

14- 7